How To Use

Plant & Tree Ties User Hints

• Cut the tie to the desired length and wrap the soft side of VELCRO® brand Plant or Tree Ties facing in around the plant or tree sapling and training stake, trellis etc. so it does not damage the plant or sapling, then simply press to secure in place.
• The more times you wrap around something, the stronger and more secure it will be – it may be necessary to wrap around at least twice for something stiff, robust or large such as a rose bush or sapling.
• Ensure you cut enough, both for a secure hold and also to enable you to adjust it as your plant grows – remember it is reusable!

INDUSTRIAL STRENGTH™ User Hints

• Not designed for fabrics, vinyl, underwater.
• Ensure both surfaces are clean and dry before engaging.
• The adhesive is very strong and is not easily removed – take care where you stick it!
• Allow at least 15 minutes for adhesive to set before attaching.

ONE-WRAP® and Reusable Ties User Hints

• To secure Tie so it doesn't get lost when not in use, wrap tie (rough-side in) around a single wire.
• Thread small end of tie through the cut out slot at top of the tie and pull tight.
• Tie is self gripping and simply wraps around itself.
• NOTE: simply cut Self Gripping Ties to size and wrap on itself.
• VELCRO® brand Adjustable & Self Gripping Ties will open and close 100s of times, but always try to keep the hook & loop engaged to prevent 'fluff' and dirt getting into the hook – this can affect its effectiveness.

VEL-STRAP® User Hints

Securing VELCRO® brand Adjustable Hanging Straps to a wall:

1. Wear eye protection when drilling.
2. Drill hole in wall and insert wall-plug flush with the surface.
3. Clean hole (use 6mm Ø drill bit).
4. Insert screw through hole in buckle - loop side should face away from wall.
5. Screw fixing into the wall-plug.
6. Wrap strap around object, feeding the end of the strap behind the tab and into the buckle. Tighten and secure.